2026-10-29
▼ ▲ saasservicemgmt.projects.locations.unitGroupOperations.delete
Description : Delete a single unit group operation.
Flat Path : v1beta1/projects/{projectsId}/locations/{locationsId}/unitGroupOperations/{unitGroupOperationsId}
HTTP Method : DELETE
Parameters :
name
Location : path
Pattern : ^projects/[^/]+/locations/[^/]+/unitGroupOperations/[^/]+$
Required : Yes
Type : string
Description : Required. The resource name of the resource within a service.
requestId
Description : Optional. An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. The server will guarantee that for at least 60 minutes since the first request. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported (00000000-0000-0000-0000-000000000000).
Type : string
Location : query
etag
Location : query
Type : string
Description : Optional. The etag known to the client for the expected state of the unit group operation. This is used with state-changing methods to prevent accidental overwrites when multiple user agents might be acting in parallel on the same resource. An etag wildcard provide optimistic concurrency based on the expected existence of the unit group operation. The Any wildcard (`*`) requires that the resource must already exists, and the Not Any wildcard (`!*`) requires that it must not.
validateOnly
Description : Optional. If "validate_only" is set to true, the service will try to validate that this request would succeed, but will not actually make changes.
Location : query
Type : boolean
Parameter Order : name
Path : v1beta1/{+name}
Scopes :
▼ ▲ saasservicemgmt.projects.locations.unitGroupOperations.create
HTTP Method : POST
Parameter Order : parent
Parameters :
parent
Location : path
Pattern : ^projects/[^/]+/locations/[^/]+$
Description : Required. The parent of the unit group operation.
Type : string
Required : Yes
unitGroupOperationId
Description : Required. The ID value for the new unit group operation.
Type : string
Location : query
validateOnly
Description : Optional. If "validate_only" is set to true, the service will try to validate that this request would succeed, but will not actually make changes.
Type : boolean
Location : query
requestId
Type : string
Location : query
Description : Optional. An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. The server will guarantee that for at least 60 minutes since the first request. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported (00000000-0000-0000-0000-000000000000).
Path : v1beta1/{+parent}/unitGroupOperations
Flat Path : v1beta1/projects/{projectsId}/locations/{locationsId}/unitGroupOperations
Scopes :
Description : Create a new unit group operation.
▼ ▲ saasservicemgmt.projects.locations.unitGroupOperations.patch
Description : Update a single unit group operation.
Scopes :
HTTP Method : PATCH
Path : v1beta1/{+name}
Parameters :
validateOnly
Type : boolean
Description : Optional. If "validate_only" is set to true, the service will try to validate that this request would succeed, but will not actually make changes.
Location : query
updateMask
Type : string
Location : query
Format : google-fieldmask
Description : Optional. Field mask is used to specify the fields to be overwritten in the UnitGroupOperation resource by the update. The fields specified in the update_mask are relative to the resource, not the full request. A field will be overwritten if it is in the mask. If the user does not provide a mask then all fields in the UnitGroupOperation will be overwritten.
name
Description : Identifier. The resource name (full URI of the resource) following the standard naming scheme: "projects/{project}/locations/{location}/unitGroupOperations/{unitGroupOperation}"
Required : Yes
Type : string
Location : path
Pattern : ^projects/[^/]+/locations/[^/]+/unitGroupOperations/[^/]+$
requestId
Type : string
Location : query
Description : Optional. An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. The server will guarantee that for at least 60 minutes since the first request. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported (00000000-0000-0000-0000-000000000000).
Flat Path : v1beta1/projects/{projectsId}/locations/{locationsId}/unitGroupOperations/{unitGroupOperationsId}
Parameter Order : name
▼ ▲ saasservicemgmt.projects.locations.unitGroups.patch
Scopes :
Parameters :
validateOnly
Location : query
Description : If "validate_only" is set to true, the service will try to validate that this request would succeed, but will not actually make changes.
Type : boolean
requestId
Type : string
Location : query
Description : An optional request ID to identify requests.
updateMask
Type : string
Description : Field mask is used to specify the fields to be overwritten.
Format : google-fieldmask
Location : query
name
Type : string
Pattern : ^projects/[^/]+/locations/[^/]+/unitGroups/[^/]+$
Description : Identifier. The resource name (full URI of the resource) following the standard naming scheme: "projects/{project}/locations/{location}/unitGroups/{unitGroup}"
Required : Yes
Location : path
Description : Update a single unit group.
HTTP Method : PATCH
Path : v1beta1/{+name}
Parameter Order : name
Flat Path : v1beta1/projects/{projectsId}/locations/{locationsId}/unitGroups/{unitGroupsId}
▼ ▲ saasservicemgmt.projects.locations.unitGroups.create
Flat Path : v1beta1/projects/{projectsId}/locations/{locationsId}/unitGroups
Parameter Order : parent
Description : Create a new unit group.
Path : v1beta1/{+parent}/unitGroups
HTTP Method : POST
Scopes :
Parameters :
unitGroupId
Description : Required. The ID value for the new unit group.
Type : string
Location : query
requestId
Location : query
Type : string
Description : An optional request ID to identify requests.
parent
Location : path
Description : Required. The parent of the unit group.
Pattern : ^projects/[^/]+/locations/[^/]+$
Required : Yes
Type : string
validateOnly
Type : boolean
Location : query
Description : If "validate_only" is set to true, the service will try to validate that this request would succeed, but will not actually make changes.
▼ ▲ saasservicemgmt.projects.locations.unitGroups.delete
Description : Delete a single unit group.
Path : v1beta1/{+name}
Scopes :
HTTP Method : DELETE
Flat Path : v1beta1/projects/{projectsId}/locations/{locationsId}/unitGroups/{unitGroupsId}
Parameter Order : name
Parameters :
name
Required : Yes
Type : string
Pattern : ^projects/[^/]+/locations/[^/]+/unitGroups/[^/]+$
Description : Required. The resource name of the resource within a service.
Location : path
requestId
Type : string
Location : query
Description : An optional request ID to identify requests.
validateOnly
Location : query
Type : boolean
Description : If "validate_only" is set to true, the service will try to validate that this request would succeed, but will not actually make changes.
etag
Location : query
Type : string
Description : The etag known to the client for the expected state of the unit group.
▼ ▲ saasservicemgmt.projects.locations.saasReleases.get
Description : Retrieve a single saas release.
Path : v1beta1/{+name}
HTTP Method : GET
Scopes :
Parameters :
name
Pattern : ^projects/[^/]+/locations/[^/]+/saasReleases/[^/]+$
Location : path
Type : string
Description : Required. The resource name of the resource within a service.
Required : Yes
Parameter Order : name
Flat Path : v1beta1/projects/{projectsId}/locations/{locationsId}/saasReleases/{saasReleasesId}
▼ ▲ saasservicemgmt.projects.locations.saasReleases.patch
Flat Path : v1beta1/projects/{projectsId}/locations/{locationsId}/saasReleases/{saasReleasesId}
Scopes :
Parameters :
requestId
Type : string
Description : An optional request ID to identify requests.
Location : query
validateOnly
Location : query
Type : boolean
Description : If "validate_only" is set to true, the service will try to validate that this request would succeed, but will not actually make changes.
updateMask
Type : string
Location : query
Description : Field mask is used to specify the fields to be overwritten.
Format : google-fieldmask
name
Required : Yes
Pattern : ^projects/[^/]+/locations/[^/]+/saasReleases/[^/]+$
Type : string
Description : Identifier. The resource name (full URI of the resource) following the standard naming scheme: "projects/{project}/locations/{location}/saasReleases/{saasRelease}"
Location : path
Parameter Order : name
Description : Update a single saas release.
HTTP Method : PATCH
Path : v1beta1/{+name}
▼ ▲ saasservicemgmt.projects.locations.saasReleases.delete
Parameters :
name
Pattern : ^projects/[^/]+/locations/[^/]+/saasReleases/[^/]+$
Type : string
Location : path
Required : Yes
Description : Required. The resource name of the resource within a service.
validateOnly
Type : boolean
Description : If "validate_only" is set to true, the service will try to validate that this request would succeed, but will not actually make changes.
Location : query
etag
Location : query
Description : The etag known to the client for the expected state of the saas release.
Type : string
requestId
Location : query
Description : An optional request ID to identify requests.
Type : string
Path : v1beta1/{+name}
HTTP Method : DELETE
Parameter Order : name
Flat Path : v1beta1/projects/{projectsId}/locations/{locationsId}/saasReleases/{saasReleasesId}
Description : Delete a single saas release.
Scopes :
▼ ▲ saasservicemgmt.projects.locations.saasReleases.list
Flat Path : v1beta1/projects/{projectsId}/locations/{locationsId}/saasReleases
Scopes :
HTTP Method : GET
Path : v1beta1/{+parent}/saasReleases
Description : Retrieve a collection of saas releases.
Parameters :
orderBy
Description : Order results as specified in https://google.aip.dev/132.
Type : string
Location : query
parent
Pattern : ^projects/[^/]+/locations/[^/]+$
Location : path
Description : Required. The parent of the saas releases.
Required : Yes
Type : string
pageToken
Location : query
Description : The page token: If the next_page_token from a previous response is provided, this request will send the subsequent page.
Type : string
filter
Location : query
Type : string
Description : Filter the list as specified in https://google.aip.dev/160.
pageSize
Type : integer
Location : query
Format : int32
Description : The maximum number of saas releases to send per page.
Parameter Order : parent
▼ ▲ saasservicemgmt.projects.locations.saasReleases.create
Flat Path : v1beta1/projects/{projectsId}/locations/{locationsId}/saasReleases
Path : v1beta1/{+parent}/saasReleases
HTTP Method : POST
Description : Create a new saas release.
Scopes :
Parameters :
validateOnly
Location : query
Type : boolean
Description : If "validate_only" is set to true, the service will try to validate that this request would succeed, but will not actually make changes.
parent
Location : path
Description : Required. The parent of the saas release.
Pattern : ^projects/[^/]+/locations/[^/]+$
Type : string
Required : Yes
requestId
Location : query
Description : An optional request ID to identify requests.
Type : string
saasReleaseId
Type : string
Location : query
Description : Required. The ID value for the new saas release.
Parameter Order : parent