2026-07-05
▼ ▲ compute.acceleratorPodControllers.list
Flat Path : projects/{project}/zones/{zone}/acceleratorPodControllers
Parameter Order :
Parameters :
orderBy
Type : string
Description : Sorts list results by a certain order. By default, results are returned in alphanumerical order based on the resource name. You can also sort results in descending order based on the creation timestamp using `orderBy="creationTimestamp desc"`. This sorts results based on the `creationTimestamp` field in reverse chronological order (newest result first). Use this to sort resources like operations so that the newest operation is returned first. Currently, only sorting by `name` or `creationTimestamp desc` is supported.
Location : query
pageToken
Location : query
Description : Specifies a page token to use. Set `pageToken` to the `nextPageToken` returned by a previous list request to get the next page of results.
Type : string
returnPartialSuccess
Location : query
Description : Opt-in for partial success behavior which provides partial results in case of failure. The default value is false. For example, when partial success behavior is enabled, aggregatedList for a single zone scope either returns all resources in the zone or no resources, with an error code.
Type : boolean
maxResults
Type : integer
Default : 500
Location : query
Format : uint32
Description : The maximum number of results per page that should be returned. If the number of available results is larger than `maxResults`, Compute Engine returns a `nextPageToken` that can be used to get the next page of results in subsequent list requests. Acceptable values are `0` to `500`, inclusive. (Default: `500`)
Minimum : 0
zone
Location : path
Required : Yes
Type : string
project
Location : path
Type : string
Required : Yes
filter
Location : query
Description : A filter expression that filters resources listed in the response. Most Compute resources support two types of filter expressions: expressions that support regular expressions and expressions that follow API improvement proposal AIP-160. These two types of filter expressions cannot be mixed in one request. If you want to use AIP-160, your expression must specify the field name, an operator, and the value that you want to use for filtering. The value must be a string, a number, or a boolean. The operator must be either `=`, `!=`, `>`, `<`, `<=`, `>=` or `:`. For example, if you are filtering Compute Engine instances, you can exclude instances named `example-instance` by specifying `name != example-instance`. The `:*` comparison can be used to test whether a key has been defined. For example, to find all objects with `owner` label use: ``` labels.owner:* ``` You can also filter nested fields. For example, you could specify `scheduling.automaticRestart = false` to include instances only if they are not scheduled for automatic restarts. You can use filtering on nested fields to filter based onresource labels. To filter on multiple expressions, provide each separate expression within parentheses. For example: ``` (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake") ``` By default, each expression is an `AND` expression. However, you can include `AND` and `OR` expressions explicitly. For example: ``` (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel Broadwell") AND (scheduling.automaticRestart = true) ``` If you want to use a regular expression, use the `eq` (equal) or `ne` (not equal) operator against a single un-parenthesized expression with or without quotes or against multiple parenthesized expressions. Examples: `fieldname eq unquoted literal` `fieldname eq 'single quoted literal'` `fieldname eq "double quoted literal"` `(fieldname1 eq literal) (fieldname2 ne "literal")` The literal value is interpreted as a regular expression using GoogleRE2 library syntax. The literal value must match the entire field. For example, to filter for instances that do not end with name "instance", you would use `name ne .*instance`. You cannot combine constraints on multiple fields using regular expressions.
Type : string
Path : projects/{project}/zones/{zone}/acceleratorPodControllers
Description : Lists the AcceleratorPodController resources in the specified zone.
HTTP Method : GET
Scopes :
▼ ▲ compute.acceleratorPodControllers.insert
Flat Path : projects/{project}/zones/{zone}/acceleratorPodControllers
Parameter Order :
Parameters :
requestId
Type : string
Location : query
zone
Location : path
Required : Yes
Type : string
project
Location : path
Type : string
Required : Yes
Path : projects/{project}/zones/{zone}/acceleratorPodControllers
Description : Inserts a new AcceleratorPodController resource.
HTTP Method : POST
Scopes :
▼ ▲ compute.acceleratorPodControllers.patch
Flat Path : projects/{project}/zones/{zone}/acceleratorPodControllers/{resourceId}
Parameter Order :
Parameters :
updateMask
Location : query
Type : string
Format : google-fieldmask
requestId
Location : query
Type : string
project
Location : path
Required : Yes
Type : string
resourceId
Pattern : [a-z](?:[-a-z0-9]{0,61}[a-z0-9])?|[1-9][0-9]{0,19}
Required : Yes
Type : string
Location : path
zone
Location : path
Required : Yes
Type : string
Path : projects/{project}/zones/{zone}/acceleratorPodControllers/{resourceId}
Scopes :
Description : Patches the specified AcceleratorPodController resource.
HTTP Method : PATCH
▼ ▲ compute.acceleratorPodControllers.get
HTTP Method : GET
Description : Gets the specified AcceleratorPodController resource.
Scopes :
Path : projects/{project}/zones/{zone}/acceleratorPodControllers/{resourceId}
Parameters :
resourceId
Type : string
Pattern : [a-z](?:[-a-z0-9]{0,61}[a-z0-9])?|[1-9][0-9]{0,19}
Required : Yes
Location : path
zone
Location : path
Type : string
Required : Yes
project
Type : string
Required : Yes
Location : path
Parameter Order :
Flat Path : projects/{project}/zones/{zone}/acceleratorPodControllers/{resourceId}
▼ ▲ compute.acceleratorPodControllers.delete
Scopes :
Description : Deletes the specified AcceleratorPodController resource.
HTTP Method : DELETE
Path : projects/{project}/zones/{zone}/acceleratorPodControllers/{resourceId}
Parameters :
project
Type : string
Required : Yes
Location : path
requestId
Type : string
Location : query
resourceId
Type : string
Pattern : [a-z](?:[-a-z0-9]{0,61}[a-z0-9])?|[1-9][0-9]{0,19}
Required : Yes
Location : path
zone
Required : Yes
Type : string
Location : path
Flat Path : projects/{project}/zones/{zone}/acceleratorPodControllers/{resourceId}
Parameter Order :
▼ ▲ compute.dhcpOptionsConfigs.insert
Path : projects/{project}/regions/{region}/dhcpOptionsConfigs
Scopes :
Description : Creates a DhcpOptionsConfig in the specified project in the given location using the parameters that are included in the request.
HTTP Method : POST
Flat Path : projects/{project}/regions/{region}/dhcpOptionsConfigs
Parameter Order :
Parameters :
requestId
Location : query
Description : An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported (00000000-0000-0000-0000-000000000000). end_interface: MixerMutationRequestBuilder
Type : string
region
Pattern : [a-z](?:[-a-z0-9]{0,61}[a-z0-9])?
Type : string
Location : path
Description : Name of the region of this request.
Required : Yes
project
Description : Project ID for this request.
Required : Yes
Pattern : (?:(?:[-a-z0-9]{1,63}\.)*(?:[a-z](?:[-a-z0-9]{0,61}[a-z0-9])?):)?(?:[0-9]{1,19}|(?:[a-z0-9](?:[-a-z0-9]{0,61}[a-z0-9])?))
Type : string
Location : path
▼ ▲ compute.dhcpOptionsConfigs.patch
Path : projects/{project}/regions/{region}/dhcpOptionsConfigs/{dhcpOptionsConfig}
Description : Patches the specified DhcpOptionsConfig resource with the data included in the request. This method supports PATCH semantics and usesJSON merge patch format and processing rules.
HTTP Method : PATCH
Scopes :
Flat Path : projects/{project}/regions/{region}/dhcpOptionsConfigs/{dhcpOptionsConfig}
Parameter Order :
Parameters :
dhcpOptionsConfig
Description : Name of the DhcpOptionsConfig resource to patch.
Required : Yes
Location : path
Type : string
Pattern : [a-z](?:[-a-z0-9]{0,61}[a-z0-9])?|[1-9][0-9]{0,19}
project
Location : path
Type : string
Pattern : (?:(?:[-a-z0-9]{1,63}\.)*(?:[a-z](?:[-a-z0-9]{0,61}[a-z0-9])?):)?(?:[0-9]{1,19}|(?:[a-z0-9](?:[-a-z0-9]{0,61}[a-z0-9])?))
Description : Project ID for this request.
Required : Yes
region
Description : Name of the region for this request.
Required : Yes
Location : path
Pattern : [a-z](?:[-a-z0-9]{0,61}[a-z0-9])?
Type : string
updateMask
Type : string
Format : google-fieldmask
Description : update_mask indicates fields to be updated as part of this request.
Location : query
requestId
Location : query
Description : An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported (00000000-0000-0000-0000-000000000000). end_interface: MixerMutationRequestBuilder
Type : string
▼ ▲ compute.dhcpOptionsConfigs.list
Parameters :
returnPartialSuccess
Location : query
Type : boolean
Description : Opt-in for partial success behavior which provides partial results in case of failure. The default value is false. For example, when partial success behavior is enabled, aggregatedList for a single zone scope either returns all resources in the zone or no resources, with an error code.
orderBy
Location : query
Description : Sorts list results by a certain order. By default, results are returned in alphanumerical order based on the resource name. You can also sort results in descending order based on the creation timestamp using `orderBy="creationTimestamp desc"`. This sorts results based on the `creationTimestamp` field in reverse chronological order (newest result first). Use this to sort resources like operations so that the newest operation is returned first. Currently, only sorting by `name` or `creationTimestamp desc` is supported.
Type : string
pageToken
Location : query
Description : Specifies a page token to use. Set `pageToken` to the `nextPageToken` returned by a previous list request to get the next page of results.
Type : string
filter
Description : A filter expression that filters resources listed in the response. Most Compute resources support two types of filter expressions: expressions that support regular expressions and expressions that follow API improvement proposal AIP-160. These two types of filter expressions cannot be mixed in one request. If you want to use AIP-160, your expression must specify the field name, an operator, and the value that you want to use for filtering. The value must be a string, a number, or a boolean. The operator must be either `=`, `!=`, `>`, `<`, `<=`, `>=` or `:`. For example, if you are filtering Compute Engine instances, you can exclude instances named `example-instance` by specifying `name != example-instance`. The `:*` comparison can be used to test whether a key has been defined. For example, to find all objects with `owner` label use: ``` labels.owner:* ``` You can also filter nested fields. For example, you could specify `scheduling.automaticRestart = false` to include instances only if they are not scheduled for automatic restarts. You can use filtering on nested fields to filter based onresource labels. To filter on multiple expressions, provide each separate expression within parentheses. For example: ``` (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake") ``` By default, each expression is an `AND` expression. However, you can include `AND` and `OR` expressions explicitly. For example: ``` (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel Broadwell") AND (scheduling.automaticRestart = true) ``` If you want to use a regular expression, use the `eq` (equal) or `ne` (not equal) operator against a single un-parenthesized expression with or without quotes or against multiple parenthesized expressions. Examples: `fieldname eq unquoted literal` `fieldname eq 'single quoted literal'` `fieldname eq "double quoted literal"` `(fieldname1 eq literal) (fieldname2 ne "literal")` The literal value is interpreted as a regular expression using GoogleRE2 library syntax. The literal value must match the entire field. For example, to filter for instances that do not end with name "instance", you would use `name ne .*instance`. You cannot combine constraints on multiple fields using regular expressions.
Type : string
Location : query
project
Type : string
Pattern : (?:(?:[-a-z0-9]{1,63}\.)*(?:[a-z](?:[-a-z0-9]{0,61}[a-z0-9])?):)?(?:[0-9]{1,19}|(?:[a-z0-9](?:[-a-z0-9]{0,61}[a-z0-9])?))
Location : path
Description : Project ID for this request.
Required : Yes
region
Description : Name of the region of this request.
Required : Yes
Location : path
Pattern : [a-z](?:[-a-z0-9]{0,61}[a-z0-9])?
Type : string
maxResults
Description : The maximum number of results per page that should be returned. If the number of available results is larger than `maxResults`, Compute Engine returns a `nextPageToken` that can be used to get the next page of results in subsequent list requests. Acceptable values are `0` to `500`, inclusive. (Default: `500`)
Format : uint32
Minimum : 0
Type : integer
Location : query
Default : 500
Flat Path : projects/{project}/regions/{region}/dhcpOptionsConfigs
Parameter Order :
Scopes :
Description : Lists the DhcpOptionsConfigs for a project in the given location.
HTTP Method : GET
Path : projects/{project}/regions/{region}/dhcpOptionsConfigs
▼ ▲ compute.dhcpOptionsConfigs.get
Path : projects/{project}/regions/{region}/dhcpOptionsConfigs/{dhcpOptionsConfig}
Scopes :
HTTP Method : GET
Description : Returns the specified DhcpOptionsConfig resource in the given location.
Parameter Order :
Flat Path : projects/{project}/regions/{region}/dhcpOptionsConfigs/{dhcpOptionsConfig}
Parameters :
region
Location : path
Pattern : [a-z](?:[-a-z0-9]{0,61}[a-z0-9])?
Type : string
Description : Name of the region of this request.
Required : Yes
project
Location : path
Pattern : (?:(?:[-a-z0-9]{1,63}\.)*(?:[a-z](?:[-a-z0-9]{0,61}[a-z0-9])?):)?(?:[0-9]{1,19}|(?:[a-z0-9](?:[-a-z0-9]{0,61}[a-z0-9])?))
Type : string
Description : Project ID for this request.
Required : Yes
dhcpOptionsConfig
Description : Name of the DhcpOptionsConfig resource to return.
Required : Yes
Pattern : [a-z](?:[-a-z0-9]{0,61}[a-z0-9])?|[1-9][0-9]{0,19}
Type : string
Location : path
▼ ▲ compute.dhcpOptionsConfigs.delete
Description : Deletes the specified DhcpOptionsConfig in the given location
HTTP Method : DELETE
Scopes :
Path : projects/{project}/regions/{region}/dhcpOptionsConfigs/{dhcpOptionsConfig}
Parameters :
region
Location : path
Pattern : [a-z](?:[-a-z0-9]{0,61}[a-z0-9])?
Type : string
Description : Name of the region of this request.
Required : Yes
requestId
Location : query
Description : An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed. For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments. The request ID must be a valid UUID with the exception that zero UUID is not supported (00000000-0000-0000-0000-000000000000). end_interface: MixerMutationRequestBuilder
Type : string
dhcpOptionsConfig
Location : path
Pattern : [a-z](?:[-a-z0-9]{0,61}[a-z0-9])?|[1-9][0-9]{0,19}
Type : string
Description : Name of the DhcpOptionsConfig resource to delete.
Required : Yes
project
Location : path
Pattern : (?:(?:[-a-z0-9]{1,63}\.)*(?:[a-z](?:[-a-z0-9]{0,61}[a-z0-9])?):)?(?:[0-9]{1,19}|(?:[a-z0-9](?:[-a-z0-9]{0,61}[a-z0-9])?))
Type : string
Description : Project ID for this request.
Required : Yes
Flat Path : projects/{project}/regions/{region}/dhcpOptionsConfigs/{dhcpOptionsConfig}
Parameter Order :
▼ ▲ compute.dhcpOptionsConfigs.testIamPermissions
Path : projects/{project}/regions/{region}/dhcpOptionsConfigs/{resource}/testIamPermissions
HTTP Method : POST
Description : Returns permissions that a caller has on the specified resource.
Scopes :
Parameter Order :
Flat Path : projects/{project}/regions/{region}/dhcpOptionsConfigs/{resource}/testIamPermissions
Parameters :
project
Description : Project ID for this request.
Required : Yes
Location : path
Pattern : (?:(?:[-a-z0-9]{1,63}\.)*(?:[a-z](?:[-a-z0-9]{0,61}[a-z0-9])?):)?(?:[0-9]{1,19}|(?:[a-z0-9](?:[-a-z0-9]{0,61}[a-z0-9])?))
Type : string
resource
Description : Name or id of the resource for this request.
Required : Yes
Location : path
Type : string
Pattern : [a-z](?:[-a-z0-9]{0,61}[a-z0-9])?|[1-9][0-9]{0,19}
region
Description : The name of the region for this request.
Required : Yes
Location : path
Pattern : [a-z](?:[-a-z0-9]{0,61}[a-z0-9])?
Type : string